Vielen Dank für Ihren Besuch
Diese Maschine wurde kürzlich verkauft. Schauen Sie sich gerne unsere vergleichbaren Maschinen an oder kontaktieren Sie uns direkt.
DOOSAN - PUMA 4100BBG-TUR-DOO-2018-00001
Haben Sie weitere Fragen? Kontaktieren Sie uns!
Philipp Gubisch
+49 162 402 75 81
p.gubisch@gindumac.com
- GINDUMAC
- Produkte
- Werkzeugmaschinen
- Used Horizontal Lathe DOOSAN Puma 4100B - 2018 - for sale | GINDUMAC.COM
This DOOSAN Puma 4100B Horizontal Lathe was manufactured in 2018 in South Korea. It is equipped with a maximum workpiece diameter of 550 mm and a maximum workpiece length of 1042 mm. Controlled by a FANUC 0i Series control, it offers a spindle speed of 2000 rpm with a spindle power of 35 kW (30 min) / 22 kW (continuous). This machine accommodates 10 tools and features a A2-11 ASA taper size, providing versatility and precision in machining operations. It comes with chip conveyor, hydraulic, lubrication and cooling system. The machine has a run time of 796 hours, is still under power and can be inspected at any time.
Übersicht
- Hersteller: DOOSAN
- jahr: 2018
- MODELL: PUMA 4100B
- Produktionsstunden: 796
- anwendungstyp: Drehen
- Standort: Bulgarien
- maschinentyp: Horizontal-Drehmaschine
- Marke Steuergerät: FANUC
Technische Daten - DOOSAN PUMA 4100B
Steuerung
- Steuerungsmarke: FANUC
- Steuerungsmodell: 0i Series
Maße
- Maschinentiefe: 2056 mm
- Maschinenhöhe: 2194 mm
- Maschinengewicht: 9950 kg
Bewegung
- X-Achsverfahrweg: 352 mm
- Z-Achsverfahrweg: 1105 mm
Technische Spezifikation
- Spindelleistung: 35 kW
- Spindeldrehzahl: 2000 RPM
Zusätzliche Informationen
Additional equipment
- Hydraulic system // Tank capacity: 16 L, Viscosity grade of oil: ISO VG32
- Lubrication system // Tank capacity: 4.3 L, Discharge volume: 0,1 (50Hz) L/min, Viscosity grade of oil: ISO VG68
- Coolant system // Tank capacity: 365 L, Coolant oil type: Water soluble cutting fluid, Coolant pump motor power: 0.4 kW, Coolant pump max. pressure: 0,15/0,1 (60/50Hz) MPa, Coolant pump max. flow rate: 40 L/min
- Full enclosure chip and coolant shield
- Front door interlock Foot switch
- Hydraulic power unit
- Hydraulic chuck & actuating cylinde
- Work light
- Chip conveyor
Machine Benefits
Qualitative Machine Benefits
- Tool holder & boring sleeve kit
- Easy operating system
- Doosan ez guide i
- Programmable tail stock
- Coolant pump 4 kw 1,0 mpa 30l/min
- Tool setter automatic
- Signal tower
- Oil skimmer
- Doosan tool load monitoring
- Arbitrary speed threading hardened & ground hard jaws
Technical Machine Benefits
- Swing over bed: 790mm // swing over saddle: 590mm
- Max turning diameter: 550mm
- Max turning length: 1042mm
- Bar working diameter: 116. 5mm
- Accuracy: positioning x, z: 0,01/0,02mm
- Repeatability: ±0,002 / ±0,003
- Drive mechanism - belt drive + gear box standard chuck size: 380(15”) mm // spindle nose: a2-11 asa // spindle bearing diameter (front): Ø180 mm // spindle through hole diameter: Ø132 mm // bore of draw tube: Ø117. 5 mm
- Max. Spindle torque for turning: 2379 n. M
- Tail stock - drive mechanism: programmable (drive bar + carriage) // quill diameter: Ø120 mm // quill travel: 120 mm // tail stock travel: 1000 mm // tail stock center: #5 dead center mt
- Turret - tool holder mount type: di base holder // number of tool stations: 10 ea // turret indexing type: servo driven type // turret indexing time – full station: 1. 9 // od tool size: 32x32 mm // max. Boring bar size: Ø60 mm // rapid traverse rate x, z - axis: 16/20 m/min // ballscrew (diameter x lead) – x axis: 40 x 8 mm // ballscrew (diameter x lead) – z axis: 50 x 10 mm // servo motor power x, , z – axis: 4,0 / 7,0 kw
Extra Information
Control power: 3Ph-AC220V/50Hz // Required power capacity: 42.25 kVA // Compressed air supply, pressure: 0.5 MPa // Display unit size 15” color // 380V – 220V Electric power transformer
*Es kann zu Abweichungen zwischen den angegebenen Daten und den tatsächlichen Werten kommen, diese müssen vom Vertriebsmitarbeiter bestätigt werden.
Philipp Gubisch
Zahlungsoptionen
Vorkasse
Asset-Finanzierung